What I found out: 5190 Heavy-Duty (OTC)
- Ideal tool for disassembling drivelines
- Will not damage the driveshaft yoke bearing cups or joints
- Fits practically all Class 7 and 8 trucks
- May be used with up to a one-inch impact wrench
- Quickly and easily removes sealed U-joint cups without the need for hammering or heat
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
The OTC heavy-responsibility common joint puller is the ideal tool for disassembling drivelines quickly and easily removes sealed U-joint cups without the need for hamillimeterering or heat and won’t damage the driveshaft, yoke, bearing cups, or joints. Can be used with up to a one-inch affect wrench and fits practically all Class 7 and 8 trucks. Fits all spicer drivelines 1610, 1710, 1760, 1810, 1880 Spicer SPL 140, 170, and 250 “Life Series” Meritor (Rockwell) 16N, 17N, 18N, 1710 Meritor RPL 20 and 25 “Permalube” Series.
TEKTON 5702 Gear, 4-Piece vs OTC-5190-A
Smoothly and carefully slide gears, OTC-5190A pulleys, flywheels and other press-fit parts off shaft with the versatile TEKTON 5702 4-pc. 3-Jaw Gear Puller Set. Four pullers fit a large range of sizes and feature a common design that can grip eight different ways: around outside edge or through inside openings while set shortly, standard, long or extra long reach positions. Three jaws evenly distribute powerful pulling forces, defending edges of gear from bending or chipping damage. Turn drive screw with any style hand wrench or ratchet and the exact, cold-rolled acme threads glide along smoothly without attaching or chattering, under high stress.
Alltrade 648620 Kit 5 Master Axle Tool Set
The Powerbuilt Master Axle Puller Kit is intended for vehicle body work, also as pulling bearings, gears, and front wheel drive axle shafts. The kit holds 5 pounds. Slide ha millimeter assembly with tapered cone nut, tapping screw and adapter, special threaded adapter, hook, shoulder screw and nut set, three pulling jaws, 2-jaw and 3-jaw yokes, and front wheel drive axle puller adapter. Storage case comes complete with laminated instruction sheets and photos.
Powerbuilt® 4 Ton Cable Come-Along with Double Gear – 642245
The Powerbuilt 4 ton cable puller is a heavy-responsibility overbuilt workhorse prepared to take on the toughest jobs in the field or on the worksite. Its perfect for building and repairing fences, for pulling and positioning heavy machinery and appliances and for carefully securing loads. Lasting steel construction decreases warping and misalignment and extends service life in severe conditions. Powerbuilt tools are constructed with the performance, features, fit and finish to satisfy the most calling for users.
Alltrade 648613 Kit 43 Combination Jaw Gear Tool Set
Powerbuilt by Alltrade Tools LLC is a world leader in the design, manufacturing and marketing of tools and shop equipment. Founded in 1979, the Long Beach, California established firm is privately held, with world manufacturing and sales buildings serving customers on every continent. The company’s mission declaration: Alltrade designs, markets and supplies tools and shop equipment that match and surpass our customers’ expectations of quality, service and value, while attaining profits to ensure the Company’s and its employees’ future growth and development. Alltrade offers our customers novelty, flexibility and speed to market.
(464) 2-Ton Griplock
The OTC 464 is made to our rigorous plans to ensure the quality professionals expect from OTC. Pressure bearing yoke cap holds jaws in place for easy set up in any orientation. 2 or 3 Jaw application. Both External and interior Pulling Action. Live Center action forcing screw. Professional finished for long lasting durability. 4″ maximum reach and 3″ to 4″ spread.
GearWrench 3561 2 Ton 3 & 2 Jaw Reversible vs OTC 5190 Heavy-Duty OTC-5190A pricing
KD Tools 3561 Features:Jaws reverse for inside and outside pulling. Big spread and reach accomodate flywheels, pulleys and gears. Three-point grip applies a parallel pull. Maximum spread: 5". Maximum reach: 3-1/2"Capacity: 2 tonCenter screw size: 3/8 x 24Screw Length: 4-7/8"Thickness Upper/Lower: 3/16 – 1/8Width Upper/Lower: 5/16 – 1/2Weight: 1 Lb, 5 OzKD Tools 3561 mix 2 & 3 Jaw Reversible Gear Puller – 2 Ton.
Tiger Tool 10102
Tiger Tool heavy-responsibility common joint puller is engineered for use with up to a one-inch affect wrench, this tool gives the final “brute strength” for disassembling drivelines. Tested and suggested by Dana Spicer Corp and the patented design gives the most efficient mechanical advantage for disassembly. Fits Spicer drivelines 1610, 1710, 1760, 1810, 1880, Meritor (Rockwell) 16N, 17N, 18N, 1710, Spicer SPL 140, 170, 250 “Life Series”, and Meritor RPL 20, 25 “Permalube” Series. (intended to work with U-Joint bearing cups from 1. 5″ to 2. 2″ and will fit virtually all Class 7 and 8 Trucks and Machinery).
Maasdam CAL-4 EZ Winch Cable, 4-Ton Capacity vs OTC 5190 Heavy-Duty OTC-5190A review
Drop-forged steel slip hooks with OSHA suggested safety latches. Heavy gauge steel, strengthened ratchet guard. Import buyer grade. Interlocking, precision fit, steel alloy pawls with safety spacer sleeve. Permanent, comfy, non-slip grip. Precision-cast aluminum alloy ratchet wheel – one part construction. Trouble free, ? Notch-At-A-Time? Letdown.
T1A 3-Jaw Gear – 6 Inch – 60-152mm Range – For Removing Gears Sprockets Bearings Pulleys and Flywheels
This heavy responsibility 3-Jaw 6 Inch puller is made from top quality drop-forged high carbon steel that assists to distribute extreme pulling forces, which gives you a ton of pulling power This puller has reversible jaws to ensure correct grip on a large range of jobs as well as, however not restricted to, the elimination of gears, sprockets, bearings, pulleys and flywheels without damage. The chrome finish helps fight rust and corrosion. Made for any experienced or novice vehicle fan. It’s certainly a must-have for your tool box What separates T1A parts from others is quite simple: T1A stands behind what they sell 100. Your satisfaction & safety is their major concern. T1A keeps that commitment starting with manufacturing and sees it through with the highest-quality buyer service. T1A proudly runs the most dependable factories and extends over 30 years of vehicle relationships and experience to its customers. This is why car people get excited about T1A tools and its also the reason T1A can make an business leading ensure. 100 Total Satisfaction ensure: If you are not 100 pleased with your buy, just send it back TRUBUILT 1 vehicle will refund or replace your tool. Full 12-month substitute warranty & 30 day money back ORDER NOW and when you doconsider purchasing a second one for a friend or for your other toolbox.
Powerbuilt 648721 8" Gear with 3-Way Reversible Jaw vs OTC 5190 Heavy-Duty OTC-5190A price
For pulling gears and pulleys. 8 inch reach, 9-1/2 inch spread, 7-ton capacity. Heavy responsibility drop-forged and heat-treated yoke and jaws. May be used with either two or three jaws. Jaws reverse for inside or outside pulls and reverse end-to-end for different depths of pulls and different size hooks. Chrome and black oxide finish. Lifetime warranty.
(1062) 17-1/2 Ton Hydraulic Push-
The OTC 1062 may be used with numbers 1124 and 1130 bearing pulling attachments or number 680 pulley pulling attachment. Can also be used with number 1154 interior pulling attachment. Its maximum reach is 18-1/2″ and spread is 5-3/4″ – 11-3/4″. The ends of legs are threaded 5/8″-18. The usable reach: 11-5/8″. Note: Usable reach equals leg length minus 4-7/8″ when using leg ends.
(1067) Hydraulic Grip-O-Matic – 17-1/2 Ton, 3 Jaw vs OTC 5190 Heavy-Duty OTC-5190A reviews
The OTC 1067, a dependable single-acting Power Twin ram is paired with a versatile 2-jaw or 3-jaw puller. Lightweight ram may be used in other applications. Hydraulic pump isn’t included. 17-1/2 Ton capacity with a maximum reach of 11-1/2″ and a maximum spread of 20″. Jaw thickness is 13/16″ and width is 1-9/32″.
- OTC 5192 Heavy-Duty Bearing Cup Installer
- OTC 7075 Transmission Output Shaft End Yoke Remover
- OTC 7249 Ball Joint, U-Joint and Brake Anchor Pin Service Kit
- OTC 7248 C Frame Press U-Joint, Brake Anchor Pin and Ball Joint Removing/Installing tool
- OTC 5039 Charged Air Cooler Tester for Class 7 and Class 8 Trucks
- OTC 7490 U-Joint Push-Puller
- Tiger Tool 10102 Heavy-Duty Universal Joint Puller
- OTC Tools 5190A Heavy Duty U-Joint Puller
Models to consider: