What I found out: Projector Drop-in (Universal)
- Lightweight, Heat-Dissipating Surface
- Multiple Mounting Points For Alignment
- Enter your model number above to make sure this fits.
- Supports Projectors Up To 30 lbs
- 2′ x 2′ Reinforced Steel Plate
- Replaces a Standard Ceiling Tile
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
Magma Gait/Filet Mate Table w/LeveLock – 20" – White/Black vs AMRDCP100-KIT
MAGMA BAIT FILET MATE TABLE AMRDCP100KIT LEVELOCK 20″ WHITE BLACK WHITE Bait/Filet Mate Table w/LeveLock® Mount 20″ x 12-3/4″ (50. 8 cm x 32. 4 cm) Magma’s original “Bait/Filet Mate” tables have an nice new look, BLACK This new color core material has thin white cap layers and a bright black center. Our “Magma” logo and useful new ruler was engraved to show the black core for a clean look while rising visibility when measuring the days catch. Not just intended for bait preparation or fish cleaning but may also be used for food or cocktail service. Constructed with the finest commercial quality high-density polyethylene that’s virtually indestructible, practical, won’t take in fish odors, and more sanitary than wood filet tables. This material is UV stabilized and FDA accepted for mildew free, crack free, and maintenance free use. Equipped with (2) redesigned knife holsters that accommodate bigger filet knives, useful receptacle for Pliers, rounded edges / corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting. These tables are supplied with the LeveLock® all-angle fish rod holder mount, which is our most well-liked mount and was made using heat-treated Stainless Steel and hard-anodized aluminum for superior corrosion resistance. It is fast release cam-action design lets convenient all-angle modification when in use or simply folds flat for storage. The 1-1/2″ (38 mm) 304 Stainless Steel tube has 8 different rotation positions and fits most cross-pin type rod holders. Our T10-312, 20″ model, is the ideal addition for any Fisherman with a small open craft where storage is restricted while the bigger T10-313, 31″ model, is large enough for any bait work or filleting those big ones that didn’t get away. 100 High Density Color Core Polyethylene Construction UV Stabilized FDA accepted Pliers Storage and.
Elitech Wall EW2 (SILVER)
This projector mount is made of hard steel, safe for your priceless projector. It’s comparable to 99% of the projectors: as long as the projector has three or four mounting hold on the body, it’ll fit. The projector’s position is adjustable after installation. Highlight: -hard metal construction – The projector may be 360 degree swivel, – It may be tilted up and down 30 degree. – Perfect for LCD or DLP projectors. – Loading capacity: 33 lb. – easy to install. – Color: Silver – Warranty: One Year from date of buy.
Scotty Gear Head
Scotty’s #428 Gear Head Mount features a fast and Easy, Drop and Lock System. It lets you to secure and re-position your rod holder with just a turn. Use in conjunction with an extender to bring your rod closer to you. May also be used to mount the Scotty #240 Striker Rod Holder onto your downrigger boom. Comes with a star handle screw and Scotty #412 post mount.
Optoma BM-5001U, Low Profile Optoma vs AMRDCP-100KIT
The BM-5001U common roof Mount gives unparalleled versatility to fit virtually all Optoma Data and Home Theater projectors weighing less than 50 lbs. Fast and correct image alignments are a breeze to accomplish using the two modification knobs. Simply change tilt ± 20° and roll ± 10° with a Phillips screwdriver or with hand. The time-saving, pre-assembled design minimizes installation steps. A fast-release feature lets the projector to slide in and out of the track, simplifyingaccess for servicing the projector or swapping out the lamp. The cable management feature keeps unsightly cable tangles out of sight. These priceless features are packaged in a sleek black design to look great anywhere – in your home, office or classroom. Security hardware is included to prevent theft.
Arkon Smartphone and Midsize Tablet Windshield for Apple iPad mini iPhone 6S 6 Plus 6 5S Samsung Galaxy S6 S5 Note 5 4
The SM6-CM117 long arm extension windshield suction car mount is ideal for use with smartphones up to 6. 75” tall (8” screen size), as well as the iPhone 6S Plus, 6 Plus, iPhone 6S, 6, 5, 5S, 5C, and 4S, Samsung Galaxy S6 edge+, S6, S5, S4 and S3, Galaxy Note 5, Note 4, and Note 3, LG G4, G3, and G2, Nexus 6 and Nexus 5, HTC One M9, One M8 and One Max, Droid MAXX, Amazon Fire Phone, Nokia Lumia 1520 and 1020, Motorola Moto G and Moto X. It also holds midsize (7” or 8” screen size) tablets, as well as the iPad mini, Galaxy Tab S 8. 4, Galaxy Note 8. 0, Galaxy Tab 4 or 3 7. 0 and 8. 0, Galaxy Tab Pro 8. 4, Kindle Fire HD, and Google Nexus 7. This mount will include Arkon’s thin-Grip super common Smartphone Holder and a Rigid Long Extension Windshield Suction Pedestal with Telescoping Arm. The suction pedestal installs easily to the windshield. Simply hold the base against the mounting area and push down on the one-touch lever. The tough telescopic arm of the pedestal extends from 14. 5 inches to 18. 5 inches, keeping the smartphone or midsize tablet inside easy reach. The top and bottom adjustable-leg design of the thin-Grip super Holder helps keep any side buttons and ports unobstructed, making it ideal for use with the side available buttons on the Samsung Galaxy S6 edge+ or Note Edge. The spring-loaded holder expands to accommodate all devices, those with skins and ruggedized cases. Included with the holder are 8 support legs (4 short and 4 longer variants) that may be customized depending on device size. For most devices, the best mount holder configuration is to attach 2 short support legs on top and the 2 long support legs on the bottom of the holder. For devices taller than 5. 25”, use all 4 long support legs on the holder. For smaller devices, use all 4 short support legs on the holder.
ANGEL POS 1521030 iPad POS Wall Stand or Desktop Stand with Security Lock Accessory vs Universal Projector Drop AMRDCP100KIT pricing
IPad Point of Sales POS Wall Mountable or Desktop Stand Enclosure w/ Secure Lock for iPad 2/3/4/Air Our new iPad POS stand comes with thoughtful anti-theft features. Besides the standard security lock & keys, you may also securely install the base on any wall or on the desktop. This model is the ideal choice for users who want to save space Users can turn the iPad to have a landscape or portrait display, move from side to side and tilt up or down creating a range of easy to use angles for the iPad. Package Content – 1 x iPad POS stand – 2 x Backup keys – Bolts for mounting on wall or desktop (optional to use) – 1 x English variant assembly instruction.
1064-T: Oberon Suspended Access Point vs AMRDCP-100-KIT
Economical roof mount intended exactly for aesthetic, secure mounting of the Cisco 1040/1140/1260/3500/3600 series access point Use Cisco AIR-AP-BRACKET-1 for 3600 series and AIR-AP-BRACKET-2 for 3500 series UL Listed and intended to meet NEC300-22 and 300-23 for plenum installations OSHPD accepted OPA #1638 (. Pdf) Construction: 18 ga. Textured white powder-coated steel flange, 16 ga. Aluminum backbox Patent pending locking system, keyed alike, secures AP into the roof mount Size: 2′ x 2′ x 2″ deep Weight: 10 lbs (not as well as access point) Mount must be supported by the building structure independent of the suspended roof.
Vantage Point CGUPM12-B Front – Black vs Universal Projector Drop AMRDCP100KIT review
The common Projector Mount sets itself separately from other industrial looking roof mounts. Styled from steel and die-cast aluminum, the mounts boast a clean and simple finished look when looking at it on the roof. The CGUPM06 extends roughly 12 inches from the roof, rotates, tilts and spins in virtually any direction, and is able of functioning on flat or vaulted ceilings. The common Projector Mount is well-matched with most of today�s LCD and DLP home theater projectors and is completely adjustable to fit a large range of projector hole patterns.
Peerless PRGS-UNV Precision Gear – Black
Peerless’ PRG Precision Gear Projector Mount is changing the way image alignment is done. The patent-pending precision gear design gives exact tilt and roll image positioning with a simple turn of a handle. Once the installer sets the precision gear to the wanted position it stays securely in place. It’ll not shift throughout projector maintenance, bulb substitute, and won’t loosen or change alignment caused by vibration, accidental bumping etc. With Peerless’ PRG Precision Gear Projector Mount the installer sets it and forgets it.
QualGear QG-PM-002-BLK, Black vs Universal Projector Drop AMRDCP100KIT price
Product Overview Projector roof mount for mounting DLP/ LCD video projectors to roof. Cold-rolled steel construction. Nearly zero vibrations in comparison to aluminum models. Perfect choice for classrooms and home theaters. Product Benefits EASY INSTALLATION AS 1-2-3 1. Install the bracket on the wall. 2. Attach adapter to the rear side of projector mount. 3. Attach projector mount onto the bracket. Fast CONNECT Features fast connect/ release of projector assembly from the bracket. CABLE MANAGEMENT fitted cable management to hide HDMI, audio and video cables. Modifications Features telescopic height modification from 16. 9 to 25. 6 inches. Features horizontal and vertical angle modifications for perfect projection. PROJECTOR COMPATIBILITY intended to fit most well-liked brands. Note: If your projector has holes more than 17. 5″; separately or weighs more than 33 lbs, this mount won’t work for your projector. Check plans to see if this mount is well-matched with your projector. Plans Maximum Weight supported: 33 lbs/ 15 kgs. Color: Black. Ceilings Supported: Regular ceilings (Drywall or Wooden beams). Note: This mount isn’t supported for Walls and Vaulted ceilings. Mounting alternatives: 2-in-1 design may be installed as a Flush mount (OR) Telescopic with height modification 16. 9″ – 25. 6″. Minimum distance from roof (w/o extension column): 4. 7″/ 12 cm. Minimum distance from roof: 16. 9″/ 43 cm. Maximum distance from roof: 25. 6″/ 65 cm. Minimum distance between mounting holes: 7. 1″/ 18 cm. Maximum distance between mounting holes: 12. 4″/ 31. 5 cm. Pitch modification: -15 to +15 degrees. Roll modification: -10 to +10 degrees.
-It MI-603 Swiveling, Extendable, Rolling, Tilting Wall Bracket for Epson, Optoma, BenQ, ViewSonic, and Other LCD or DLP Video P
Well-intended Projectors aren’t generally easy to manage. They need bulb replacements, minute modifications, and are frequently finicky with image quality. Roof mounts can make fixing those modifications ten times harder. Go with MI-603 if you want the economical solution to managing your projector. Regardless where you move or where you go, you’ll be home theater able with this mount. It’s adjustable and extendable to ensure you may be able to move your home theater in an infinite number of ways and still have perfect image quality. Mounting your projector to the wall makes adjusting your image easy. No more reaching high on a vaulted roof or grabbing an unwieldly ladder every time your image goes out of concentrate. The lasting construction also assures your mounted projector wont slip, swivel, or sag on own. This mount is easy to install and comes with a almost common bracket for easy installation. Wall mounts are easily the least obtrusive way to mount a projector. It keeps your home theater or presentation office looking thin and sleek. The black powder coated finish keeps this mount looking modern. All needed hardware and installation guides are included Features: common Projector Wall Mount Bracket Tilt up or down 30 degrees Roll left or right 30 degrees Swivel 360 degrees Telescoping tube extends 10. 25 to 13 inches Load Capacity 33 lbs lasting powder coated finish Color Black Rigid extruded aluminum construction Assembly information and needed hardware included.
QualGear PRB-717-BLK Accessory vs Universal Projector Drop AMRDCP100KIT reviews
QualGear PRB-717-BLK is the new addition to our projector mounts group. PRB-717-BLK brings most advanced features that are typically found in high end professional grade projector mounts but at a price point cheap to regular buyers. PRB-717-BLK allows you to perform the following modifications for a perfect projection: Tilt: 0 to 60 Degree.
- BlueRigger High Speed HDMI Cable – 50 Feet – CL3 Rated for In-wall Installation – Supports 3D and Audio Return [Latest HDMI version]
- C2G / Cables To Go 41034 HDMI, HD15 VGA, and 3.5mm Audio Pass Through Single Gang Wall Plate
- C&E 638544909086 Premium 25′ HD15 M/M VGA/SVGA/UXGA with Audio Monitor Projector Cable
- C&E 50ft-audio-svga Premium VGA/SVGA/XGA/SXGA/UXGA HD15 Monitor Projector Cable
- C&E 315242 50FT SVGA VGA Male to Male Monitor LCD CRT Projector Cable 50′
- HDMI Keystone Coupler, Snap-in for Wallplate, White (1)
Models to consider: